Pump, suction, surgical, 2 bottles, Manufacturer,Supplier and Exporter in India

Pump, suction, surgical, 2 bottles,

Product Code : EL-HE-11832

Jainco Export is a leading Pump, suction, surgical, 2 bottles, Manufacturer,and suppliers in India, Pump, suction, surgical, 2 bottles, Uruguay (Montevideo), Pump, suction, surgical, 2 bottles, Uzbekistan (Tashkent), Pump, suction, surgical, 2 bottles, Venezuela (Caracas), Pump, suction, surgical, 2 bottles, Vietnam (Hanoi), Pump, suction, surgical, 2 bottles, Yemen (Sana'a), Pump, suction, surgical, 2 bottles, Zambia (Lusaka), Zimbabwe (Harare), Eswatini (Mbabane) (Lobamba), Ethiopia (Addis Ababa), Fiji (Suva), Gabon (Libreville), Gambia (Banjul), Georgia (Tbilisi), Ghana (Accra), India (Delhi, Mumbai, Kolkatta, Chennai), Indonesia (Jakarta), Iraq (Baghdad), Ivory Coast (Yamoussoukro), Jamaica (Kingston), Jordan (Amman), Kazakhstan (Astana), Kenya (Nairobi), Kiribati (Tarawa), Kosovo (Pristina), Kuwait (Kuwait City), Kyrgyzstan (Bishkek), Laos (Vientiane), Latvia (Riga), Lebanon (Beirut), Lesotho (Maseru), Liberia (Monrovia), Libya (Tripoli), Lithuania (Vilnuis), Luxembourg (Luxembourg), Malawi (Lilongwe), Malaysia (Federal Territory of Kuala Lumpur), Maldives (Malle), Mali (Federal Territory of Kuala Lumpur), Malta (Male), Mauritania (Nouakchott), Mauritius (Port Louis), Mexico (Mexico City), Mongolia (Ulaanbaatar), Bulgaria (Sofia), Burkina Faso (Ouagadougou), Burundi (Gitega), Cambodia (Phnom Penh), Cameroon (Yaoundé), Cape Verde (Praia), Central African Republic (Bangui), Chad (N'Djamena), Chile (Santiago), Colombia (Bogota), Comoros (Moroni), Congo (Kinshasa), Costa Rica (San José), Croatia (Zagreb), Cuba (Havana), Cyprus (Nicosia), Czech Republic (Prague), Denmark (Copenhagen) ,Djibouti (Djibouti City), Dominican Republic (Santo Domingo), DR Congo (Kinshasa), Ecuador (Quito), Egypt (Cairo), El Salvador (San Salvador), Equatorial Guinea (Malabo), Eritrea (Asmara), Estonia (Tallinn)

General Description 
Suction unit including two collection jars mounted on a trolley and AC powered.

These pumps have been designed run for 30 minutes continuously, after which the unit should be given a 30-minute period to cool down, during this period they should not be run.

Intended Use
A mobile/portable surgical aspirator/suction unit capable of creating a vacuum pressure up to 600 mmHg. 
Used for surgical procedures requiring suctioning to remove blood and irrigating fluids that accumulate in the operative field and obstruct the surgeon's view.

Technical Specifications :-
The unit should be provided with two (2) reusable collection jars.
The unit should have maintenance free operating.
The unit is designed in such a way that it requires little or no oil.
The unit should provide intermittent and continuous suction. 
Continuous is limited to 30 minutes after which the unit should be given 30 minutes to cool down.
The pump is equipped with a provision preventing fluid flowing to the pump if the collection jar is full (overflow control valve).
A gauge indicating the negative pressure generated by the unit (preferably in kPa or mmHg).
A hydrophobic bacterial filter is included in the airline to the pump.
The unit has user-adjustable suction between 0 and at least 600 mmHg (80 kPa).
A vacuum control and on/off switch are present on the casing.
The flow rate at maximum vacuum is ≥ 40 L/m (2.4 m³/h).
A suction tube of at least 1.5 meters is included.
The device should have a sturdy, shock resistant casing.
The body is to be constructed of plastic in accordance with the latest European standards.
Power requirements : 100 - 240 Volts - 50/60 Hz (not necessarily in a single unit).
The design of the device should be such that it is easy to clean/disinfect by avoiding difficult-to-reach areas and having smooth surfaces.
The collection jar is made of shatterproof polycarbonate.
The suction tube is autoclavable at 121°C.
The unit is equipped with a foot switch for control of the suction.
During operating the unit's noise level does not exceed 60.1 dB.
The unit should be mounted on a wheeled, stable, portable stand.
The stand is equipped with 360°, anti-static, swivel castors.
A least two (2) castors should be lockable.

Collection Jar :-
The two collection jars have a combined capacity of 2 litres, are transparent with clear graduation and allow for autoclaving at 121°C.

Supplied with :-
Instructions for assembly, use and maintenance in English.
1 x Plastic protective dustcover (depending on the model).
2 x sets of silicone suction tubes, diameter 8/14 mm (inner/outer), length > 2.5 m.
2 x bi-conical connectors fitting the silicone tubes.
2 x spare collection bottle including cover, gasket, and overflow valve.
50 x spare inlet anti-bacterial filters.
4 x spare seals for the collection jar.
1 x set of spare fuses (if applicable).


Office Address

[email protected]

Follow Us