Sterilizer, steam, 20L,electric, with access Manufacturer,Supplier and Exporter in India
Product Code : EL-RA-11939
Jainco Export is a leading Sterilizer, steam, 20L,electric, with access Manufacturer,and suppliers in India, Sterilizer, steam, 20L,electric, with access Uruguay (Montevideo), Sterilizer, steam, 20L,electric, with access Uzbekistan (Tashkent), Sterilizer, steam, 20L,electric, with access Venezuela (Caracas), Sterilizer, steam, 20L,electric, with access Vietnam (Hanoi), Sterilizer, steam, 20L,electric, with access Yemen (Sana'a), Sterilizer, steam, 20L,electric, with access Zambia (Lusaka), Zimbabwe (Harare), Eswatini (Mbabane) (Lobamba), Ethiopia (Addis Ababa), Fiji (Suva), Gabon (Libreville), Gambia (Banjul), Georgia (Tbilisi), Ghana (Accra), India (Delhi, Mumbai, Kolkatta, Chennai), Indonesia (Jakarta), Iraq (Baghdad), Ivory Coast (Yamoussoukro), Jamaica (Kingston), Jordan (Amman), Kazakhstan (Astana), Kenya (Nairobi), Kiribati (Tarawa), Kosovo (Pristina), Kuwait (Kuwait City), Kyrgyzstan (Bishkek), Laos (Vientiane), Latvia (Riga), Lebanon (Beirut), Lesotho (Maseru), Liberia (Monrovia), Libya (Tripoli), Lithuania (Vilnuis), Luxembourg (Luxembourg), Malawi (Lilongwe), Malaysia (Federal Territory of Kuala Lumpur), Maldives (Malle), Mali (Federal Territory of Kuala Lumpur), Malta (Male), Mauritania (Nouakchott), Mauritius (Port Louis), Mexico (Mexico City), Mongolia (Ulaanbaatar), Bulgaria (Sofia), Burkina Faso (Ouagadougou), Burundi (Gitega), Cambodia (Phnom Penh), Cameroon (Yaoundé), Cape Verde (Praia), Central African Republic (Bangui), Chad (N'Djamena), Chile (Santiago), Colombia (Bogota), Comoros (Moroni), Congo (Kinshasa), Costa Rica (San José), Croatia (Zagreb), Cuba (Havana), Cyprus (Nicosia), Czech Republic (Prague), Denmark (Copenhagen) ,Djibouti (Djibouti City), Dominican Republic (Santo Domingo), DR Congo (Kinshasa), Ecuador (Quito), Egypt (Cairo), El Salvador (San Salvador), Equatorial Guinea (Malabo), Eritrea (Asmara), Estonia (Tallinn)
General Description
Tabletop electric sterilizer (autoclave) with a capacity between 20 and 22 litre
Intended Use :-
Steam sterilizers use pressurized steam to generate moist heat to eliminate viable microbes from non-heat-sensitive medical devices, including heat-tolerant products used for surgical and general patient care.
Steam sterilization kills microbes effectively and is often viewed as the gold standard of healthcare sterilization methods.
For sterilization of full solid, porous, hollow A and B, plastics, rubber, unwrapped, bagged, single or double wrapped.
Not designed for sterilization of liquids, food stuffs or waste.
Technical Specifications :-
The internal chamber is made from stainless steel 316L.
The internal chamber has a volume between 20 and 22L.
Vacuum relief line should be filtered with ≤0.3 µm pore size to allow sterile air into chamber.
The unit has at least one 3 internal shelfs/trays.
The unit has a standard program at 2.2 bar at a temperature of 134°C.
The unit has a standard program between 1.0 and 1.1 bar with a temperature between 118 – 121°C.
The unit is fitted with a safety lock on the front door, preventing the door to be opened when the unit is under pressure.
The unit equipped with a steam generator.
The unit is fitted with a water circuit filter.
The unit is provided with an automatic cycle shut-off.
The unit provided with an internal water tank with a minimum capacity of 4 litres.
The unit is designed in such a way that outer surfaces remain at safe temperatures when the unit is in operation.
The unit is designed and constructed in such a manner that it is able to withstand frequent disinfection with hospital-grade products.
The unit's power requirements do not exceed 3 kW.
The unit work on a single-phased power grid.
Power requirements : 230 Volts - 50/60 Hz. (110 Volt units are not available).
Alarm and Safety Features :-
Alarms are audible as well as visual.
Alarms are available for/when:
- Low water.
- Door not closed.
- Exceeding high temperature limit.
- Failed cycles.
- Temperatures are about to reach limits of the equipment.
- Pressures are about to reaching limits of the equipment.
- Power failure
A notification that the end of sterilization cycle has been reached.
The unit is provided with an over-pressure safety valve and an over-temperature safety system.
Display Features :-
The unit is fitted with a front panel providing information on the unit.
