Pump centrifugal, diesel, 20cbm Manufacturer,Supplier and Exporter in India

Pump centrifugal, diesel, 20cbm

Product Code : EL-WS-11559

Jainco Export is a leading Pump centrifugal, diesel, 20cbm Manufacturer,and suppliers in India, Pump centrifugal, diesel, 20cbm Uruguay (Montevideo), Pump centrifugal, diesel, 20cbm Uzbekistan (Tashkent), Pump centrifugal, diesel, 20cbm Venezuela (Caracas), Pump centrifugal, diesel, 20cbm Vietnam (Hanoi), Pump centrifugal, diesel, 20cbm Yemen (Sana'a), Pump centrifugal, diesel, 20cbm Zambia (Lusaka), Zimbabwe (Harare), Eswatini (Mbabane) (Lobamba), Ethiopia (Addis Ababa), Fiji (Suva), Gabon (Libreville), Gambia (Banjul), Georgia (Tbilisi), Ghana (Accra), India (Delhi, Mumbai, Kolkatta, Chennai), Indonesia (Jakarta), Iraq (Baghdad), Ivory Coast (Yamoussoukro), Jamaica (Kingston), Jordan (Amman), Kazakhstan (Astana), Kenya (Nairobi), Kiribati (Tarawa), Kosovo (Pristina), Kuwait (Kuwait City), Kyrgyzstan (Bishkek), Laos (Vientiane), Latvia (Riga), Lebanon (Beirut), Lesotho (Maseru), Liberia (Monrovia), Libya (Tripoli), Lithuania (Vilnuis), Luxembourg (Luxembourg), Malawi (Lilongwe), Malaysia (Federal Territory of Kuala Lumpur), Maldives (Malle), Mali (Federal Territory of Kuala Lumpur), Malta (Male), Mauritania (Nouakchott), Mauritius (Port Louis), Mexico (Mexico City), Mongolia (Ulaanbaatar), Bulgaria (Sofia), Burkina Faso (Ouagadougou), Burundi (Gitega), Cambodia (Phnom Penh), Cameroon (Yaoundé), Cape Verde (Praia), Central African Republic (Bangui), Chad (N'Djamena), Chile (Santiago), Colombia (Bogota), Comoros (Moroni), Congo (Kinshasa), Costa Rica (San José), Croatia (Zagreb), Cuba (Havana), Cyprus (Nicosia), Czech Republic (Prague), Denmark (Copenhagen) ,Djibouti (Djibouti City), Dominican Republic (Santo Domingo), DR Congo (Kinshasa), Ecuador (Quito), Egypt (Cairo), El Salvador (San Salvador), Equatorial Guinea (Malabo), Eritrea (Asmara), Estonia (Tallinn)

General Description
Centrifugal pump, diesel driven, with a capacity of 20 m3/hr
at 20 m Total Manometric Head.

Technical Specifications :-
Self-priming centrifugal pumping set, capacity 20 Cubic Metres per hour at around 2900 RPM, at 20 meter TMH (Total Manometric Head) for 1-m suction head.
Maximum suction lift 5 metres.

Available in two mounting options :-
1/- Mounted on a trolley with 2 wheels and a handlebar,
2/- Mounted on a sturdy steel skid with carrying handles.
The skid has pre-drilled holes to facilitate bolting
it to a foundation.

The pump is coupled directly to a diesel engine of matching power requirement.
The pump casing, shaft and impeller are made from cast iron, and the water seal on the shaft is mechanical.

The suction inlet and discharge outlet will be the most efficient standard diameters established by manufacturer depending on the pumping capacity of the pump.

The supplier will also provide the most efficient diameter of inlet/outlet pipes/hoses with the pump.
An air-cooled, direct injection, diesel engine powers this pump. 
The engine is fitted with a speed control governor, a fuel tank with sufficient capacity for (2 - 3) hours of continuous normal operation. 

The pump set is supplied with following accessories :-
1 x suction hose, semi-rigid, minimum 5 m.
1 x delivery hose, minimum 20 m.
1 x stainless steel strainer.
1 x non return valve.
1 x tool kit for installation, operation and maintenance.
1 x oil container, 4 litres, for diesel engine.
1 x spare parts kit for 2000 hours of normal operation, including various filters, seals and one injector.

The engine is also fitted with a sound proof muffler and the liners are re-borable.
 
The engine is available in one of two choices of starting devices :-
- recoil starter, or
- electric starter with 12 Volt battery and charging alternator.

Two choices of air filters are also available :-
- a dry type, or
- oil bath type.


   

Office Address

[email protected]

Follow Us