You have searched for products starting with "I"
A soft iron core fits the cylinder of the primary. Complete with terminals. View Details
It runs a 10 x 7 cm gel in less than 10 minutes with crisp band resolution while enabling View Details
These Glass Flask iodine are made from borosilicate glass. All glass Flask iodine come with thick uniform wall View Details
Nosepiece: Side facing revolving quintuple nosepiece enables maximum flexibility for a wide range of magnification View Details
Eyepieces: 10x Ultra Widefield; High-Eyepoint; Rubber Eyecups View Details
Eyepieces: WF10x/22mm focusing eyepieces with roll-down eyeguards View Details
The unit consists of a capillary tube mounted on a scale, a water reservoir & connecting tubes. View Details
The unique microprocessor system automatically checks all readings throughout the test View Details
Jainco Export Instrument Trolleys are with tubular structure with two stainless steel trays View Details
It has four sections, top of sheet metal. Backrest, knee rest & Trendelenburg / reverse Trendelenburg positions View Details
Material: Austenitic stainless steel; composition: 18 to 20% chromium, 8 to 10% nickel View Details
Jainco Export for feeding infant and neonates, super smooth, coned tip having two lateral eyes View Details
Super smooth catheter with round tip for trauma free insertion. View Details
Iodine Cup Made up of Stainless Steel. Iodine Cup, Capacity 60ml, Diameter 60, Height 60 mm View Details
General Description Icepack, 0.3 litre capacity External dimensions :- 163 x 90 x 34 mm, +/- 2 mm (Type 2) Walls to be reinforced to prevent swelling. Supplied empty. View Details
General Description Icepack, 0.6 litre capacity. Technical Specifications :- Icepack with screw cap Water content : 0.55 to 0.6 litres Capacity : 0.6 litres View Details
General Description Iron 60mg (as Ferrous fumarate or ferrous sulphate) and Folic acid 400mcg tablets, blister pack of 10X10 tablets View Details
General Description Water level indicator for boreholes, with 200 metres cable; acoustic and visual signal. Technical Specifications :- Water level depth indicator, battery powered, e.g. 4.5 Volt (3 x 1.5 V), for use in boreholes to a maximum depth o View Details
General Description Incubator, Portable, for use with Microbiological Field Testing. Capacity around 4.5 liters. Clear lid. Supplied with separate 12V vehicle and 240V mains adaptors. View Details
General Description Incubator, Portable, for use with Microbiological Field Testing. Capacity around 5.5 liters. Supplied with 12 V vehicle and 240 V mains adaptors. View Details
General Description Incubation belt - to hold water testing samples close to the body for 24 hours incubation at close to body temperature – capacity to hold at least 18 E. coli testing plates. Technical specifications :- The incubation belt i View Details
General Description Incubator, Portable, for use with Microbiological Field Testing. Capacity app. 1.0 litre. Clear lid. Supplied with separate 12V vehicle and 240V mains adaptors. View Details
General Description ID Bracelets, paediatric, blue Technical Specifications :- Strong and durable, soft to the touch. Atraumatic and hypo-allergenic. Single use, tamper proof, transparent, non-stretch personal identification bracelet for paediatric View Details
General Description ID Bracelets, paediatric, red Technical Specifications :- Single use, tamper proof, transparent, non-stretch personal identification bracelet for paediatric use. Personal information to be written directly on the bracelet with co View Details
General Description Iodised salt test kit, for determining presence or absence of iodine in salt fortified with potassium iodide (KI). Kit indicates presence or absence of iodine (if the salt is fortified with potassium iodide). View Details
General Description Identity card holder (lanyard), polyester, 20mm wide, in 100% Cyan blue with 1 colour imprint (white) with safety clasp and suspension clip with PVC strap, packed in a bag of 50. View Details
General Description Infusion giving set, with burette, sterile, single use Instructions for use :- Sterile infusion giving set with graduated chamber enabling a slow intravenous administration of a precise volume of infusion or injectable drug over a View Details
General Description Infusion giving set, sterile, single use Technical Specifications :- Sterile single use device used for parenteral administration of infusions (IV fluids) by gravity. View Details
General Description Infusion arm splint, foldable, adult Technical specifications :- Helps keep the arm outstretched and in a fixed position, Splint to hold the arm in place during continuous intravenous infusions View Details
General Description Incubator, 30L, up to 80C Product Description Micro-processor controlled stabile temperature for culturing of media Temperature range 5°C above ambient up to 80°C Temperature setting +20°C to +80°C; adjustment View Details
DESCRIPTION Simple inclined plane, calibrated on one edge, with truck on wheels, adjustable pulley, and facility for mounting to retort stand. View Details
DESCRIPTION Consists of primary inner coil of heavy copper wire and secondary outer coil of fine copper wire, complete with central iron core. View Details
DESCRIPTION Ruhmkorff type induction coil with interrupter, condenser, commutator and spark length of 15mm adjustable. With reversible two-way polarity switch. View Details
DESCRIPTION Large Ruhm korff induction coil for use as a high voltage power source in the lab. View Details
DESCRIPTION For comparing rates of heat conductivity. Comprising steel tank with six equal metal rods, each of a different metal, with rubber stoppers. View Details
DESCRIPTION A very versatile set covering: organic, inorganic, complex-ion, and hydrogen-bonded covalent structures. Inorganic/Organic molecular models (teacher set). View Details
DESCRIPTION Wooden insulated box, with heating lamp controlled by a 0 - 50 degree thermostat. Internal dimensions 405mm wide x 330mm deep x 310mm high. View Details
DESCRIPTION Jainco Export Manufaturers, Exporters, Suppliers Insect Collecting Suction Jar. View Details
DESCRIPTION Approximate size 350 x 250 x 50mm (inside height 40mm). View Details
Description The wings are then held in position by pinning strips of paper across the wings (the wings themselves are not pinned). View Details